You must have noticed that with the increase in apps the performance and smoothness of any phone decreases. This is because the internal memory of your phone cannot withstand the plenty of loaded apps in it. You can partition your external memory card and use some of its space for internal memory. Different techniques are available for partitioning a memory card. Out of which we have listed some easy and basic six methods. Use any of these methods to increase your phones memory. Method 1 and 2 are the most widely used techniques as they do not restrict with the use of Stock firmware or Custom ROM. Interested users can proceed to our actual easy and step by step article on how to increase internal memory of any Android phone.
- Your phone must be ROOTED. This is essential for all the mentioned methods.
- Backup all the contents of memory card on your computer as everything gets wiped out.
- Charge your phone at least up to 60% so as to decrease the risk of interruption during the process.
Procedure to increase Internal Memory of any Android Phone:
Requirements:
- Memory card of 2 GB or more (Class 4 or higher).
- Windows PC.
- Link2SD app installed on your Phone.
- Clockworkmod (CWM) recovery installed on your Phone.
Procedure:
Step 1: Download and install the Link2SD app from the link given above in your phone.
Step 2: Now completely switch off your phone until it vibrates. You need to enter into CWM recovery mode. For doing so, you may use appropriate key combination.
Note: Touch won’t work here in recovery mode. So use volume keys for navigation and power/home button for selection.
Step 3: Navigate to the advanced option and select it. On the next screen select the partition SD card option.
Step 4: Next select the ext size. Note that this size should be less than your memory card size. Select swap size as zero.
Step 5: Wait for few minutes to complete the partitioning SD card process.
Step 6: After successful partitioning of SD card select +++++go back+++++ and then select reboot system now.
Step 7: Start your phone. Install the Link2SD app in it.
Step 8: Launch the app and grant Superuser permissions.
Step 9: A popup window will appear to choose file system of your second partition. Select Ext2 format.
Step 10: The app will then ask to reboot your device. So reboot.
Step 11: After rebooting, launch the Link2SD app again. On the top you’ll find the filter option. Click on it & choose on internal. This will show you all the apps present on the internal memory.
Step 12: Now click the option key and select multi select option. Then select all the apps.
Step 13: Again click on option and select Create link option.
Step 14: Next tick all the three options i.e. Link application file, Link dalvik cache file, Link library files. Then ok.
Step 15: Wait few minutes to create link for this partition.
Step 16: After completing everything as mentioned above click ok.
Now in order to link every new app that you will download to this partition, select options and then auto link. Every new downloaded app from Play store will get saved in this partition.
Finally you’ve successfully increased your phones internal memory. You can see the memory status from link2sd->options->storage info.
Note: Do not remove/replace the memory card as it may corrupt the apps.
Downloads:
Requirements:
- 2 GB or above memory card with class 4 or higher.
- Memory card reader.
- Mini Tool Partition Wizard Software.
- Link2SD app installed in phone.
Step 1: First of all, download and install the Mini Tool Partition Wizard software from the given link on your computer.
Step 2: Then remove memory card from your phone and insert it in card reader.
Step 3: Connect your memory card reader to computer.
Note: Do not use USB cable to built connection between phone and computer.
Step 4: Launch the Mini Tool Partition Wizard software on computer. It’ll show all your disk drives along with the memory card which you’ve just connected.
Step 5: Now right click on the memory card and select delete. (Note: This will format your SD card completely so make sure you’ve backed up everything before doing this step).
Memory card will then show unallocated space.
Step 6: Right click on memory card showing unallocated space and select create. A popup window will appear.
Step 7: In create as option select primary and in file system select FAT32 (since I use a 4GB memory card here).
Note: If your memory card size is less than 2GB then select FAT file system. If your memory card more than 2GB, then you should select FAT32 file system.
Step 8: Select partition size of your memory card for storing data and click OK. Here I select 1.5GB.
Step 9: Then select the unallocated space and right click on it and select Create.
Step 10: Again in the popup window select primary in create as option. Choose Ext2 in File system option and click ok.
Step 11: On the top left corner of Mini Tool Partition Wizard software you’ll find an Apply button. Select it.
Step 12: A popup window will appear. Click on Yes option.
Step 13: As soon as you click on it the partition process will start. Wait for the process to finish.
Step 14: After successful completion of the process you’ll get a message on your window screen.
Now copy all the data back into memory card and insert it in your phone. Then restart your phone and follow the steps 7 to 16 of method 1.
That’s all. You have successfully increased your phones internal memory. You can check the same from settings->storage.
This method can be performed without involving the Link2SD app.
Downloads:
Requirements:
- Memory card of class 4 or higher.
- Terminal Emulator app installed on your phone.
Step 1: Firstly make a partition of your SD card using Mini Tool Partition Wizard software (refer steps 1 to 14 of method 2).
Step 2: Then download and install Terminal Emulator App in your phone from the link given above.
Step 3: Launch the app.
Step 4: Type this command in it and press enter:
$ su
This will grant Superuser permissions.
Step 5: On the next line type the following command and press enter:
#a2sd xdata
Step 6: As soon as you type this command & press enter, the app will ask you whether to continue with the process or not.
So type y as the next command in the app.
Step 7: Now the app asks to reboot your phone. Again type y as the next command to restart the phone.
That’s it. You have successfully increased your phones internal memory. You may check the same from menu->settings->storage.
If you wish to undo the process and revert the phone back the way it was before, follow these steps:
Step 1: Enter these commands one after another and press enter.
$su
Step 2: Then type next command:
#a2sd noxdata
Step 3: The app will ask to reboot your phone. So press y as the next command and press enter.
After rebooting the phone will revert back to the state it was before.
Thus you can increase your device internal memory with Terminal Emulator app.
Downloads:
- INT2EXT4+ (for new ROMs).
- INT2EXT+ (for older ROMs).
Step 1: Download the INT2EXT4+ zip file on your computer in a specific folder. Remember not to extract it.
Step 2: Power off your phone completely until it vibrates. You need to enter into CWM recovery mode. For doing so, you may use appropriate key combination.
Note: Touch won’t work here in recovery mode. So use volume keys for navigation and power/home button for selection.
Step 3: Navigate to the Advanced option and select it. On the next screen select the partition SD card option.
Step 4: Next select the ext size. Note that this size should be less than your memory card size. Select swap size as zero.
Step 5: The partitioning SD card process will begin. Wait for a few minutes to complete it.
Step 6: After successful completion of the process, select ++++go back++++ then navigate to the mount and storage option and select it. On the next screen select the mount usb storage option.
Step 7: Now connect your phone to PC and copy the downloaded INT2EXT4+ zip file as it is without extracting on your SD card.
Step 8: Again go back and navigate to the mount and storage option and this time select the mount/system option.
Step 9: Return back to the main menu and select the install zip from sdcard option. On the next screen select choose from sdcard. This will show all the contents present on your memory card. Just navigate to the INT2EXT4+ zip file and select it to start the installation process.
That’s all the process completes here. You need to now restart your phone by navigating to the reboot system now option located on the recovery mode itself. You can verify the increase in your phones internal memory from menu->settings->storage.
Download:
Procedure:
Step 1: Download and install Mounts2SD app in your phone.
Step 2: Launch the app and grant Superuser permissions.
Step 3: As soon as you all the Superuser request the configuration message will popup.
Step 4: Just click on the Configure Busybox.
Step 5: Be patient until it completes. A green colored tick mark will confirm the completion.
Step 6: Next click on the Install Script option.
Step 7: After it completes, you will see the following:
Step 8: Click on Configure and tick all these options: Applications, Data, Dalvik cache, Cache.
Step 9: Scroll further down and tick the Disable Safe mode option.
Step 10: Now exit the app and restart your phone.
Step 11: After rebooting, launch the app again. You’ll see the following:
Voila! Your phones internal memory is increased.
Note: If you see any kind of error or warning in you notifications due to this app, then don’t panic as it is caused by swap. Refer the screenshot.
Just a boot can blow away the error.
Downloads:
Procedure:
Step 1: Firstly download and install S2E app in your phone from the given link.
Step 2: Launch the app and grant Superuser permissions.
Step 3: For the first time the App may somewhat look like:
Step 4: Now press the menu key and enter the settings option.
Step 5: Next tick the first two options: Mount as ext4 & Set read buffer.
Step 6: Restart your phone after performing everything as mentioned above.
Step 7: After rebooting, launch the app again. You’ll see the following options:
Step 8: Tick all those options.
This will move all the apps and their data to external sdcard.
Step 9: Make a final reboot to complete the process.
Vohoo! You’ve successfully increased your phones internal memory. Just do not remove your external memory card as it may corrupt or damage the apps.
Finally if you face any problem while going through the process or have any query then without hesitating comment us. I’ll be glad to help you. Take care !
No Comment